Petro Mold Co.

The Mason's Lodge is a very unique building to miniature ceramic villages.  As far as we know, no other village has ever had a Mason's Lodge.  This one was modeled after one from the 1800's somewhere in Montana.

Mold # 1917 -  Mason's Lodge - Dimensions: 5 x 7 x 8 1/2" - MSRP: $72.98

To Place an order click below, or call toll free: 1.(888).811.6653

Softee Acrylics                                     Acrylics                                     Translucents
SS-2 Lemon Meringue                         PT-105 White                             TL-104 Toasted Pecan
SS-45 Buttermilk                                   PT-110 Med. Gray                      TL-106 Red Maple
SS-49 Burgundy                                   PT-117 Jet Black                         TL-108 Ginger Oak
                                                                PT-191 Vanilla Ice                       TL-112 Blue Smoke
Mineral Spirit Stains                         PT-375 Ivory Tusk                      TL-113 Hyacinth Blue
MS-1 Walnut                                        PT-377 Hunter Green                  TL-115 Gold Blending Media
MS-6 Maple                                          PT-384 Copper Penny                TL-117 Black Brown
MS-14 Slate Grey                                                                                        TL-120 Gold Sable
MS-23 Golden Toffee                             Other Supplies                        TL-125 Sunflower
                                                                AC-516 Porcelain Mist               TL-126 Tangelo
                                                                AC-520 Solvent Cleaner             TL-134 Black Forest
                                                                Various Size Brushes                  TL-136 Light Patina
                                                                Soft Cloth
                                                                Paper Towels

General Instructions: Base coat fired 04-06 bisque with 2 coats of White Acrylic Stain. Thin the first coat with 1/3 water. Using a soft brush, scrub over the entire piece getting into all cracks and crevices. Apply a second coat of White Acrylic Stain full strength. Spray with Porcelain Mist Spray and allow to dry. Apply a coat of Hyacinth Blue to entire piece. Wipe back with a soft cloth allowing for detail. If you need to, you can wipe back further with solvent. When you reach the desired effect, spray and allow to dry.

SIDING, PLATFORM, and LOUVERED CENTER OF THE STEEPLE: Apply Lemon Meringue to all of the siding. Heavily dry brush with Ivory Tusk, Vanilla Ice and White, in this order.

TRIM, WINDOWS & EAVES: Apply Buttermilk.

DOOR: Heavily dry brush with Burgundy then lightly dry brush with White. Paint the door knob Jet Black.

ROOF: Generously apply Golden Toffee to the entire roof. Wipe back with a soft cloth to desired effect and spray. Lightly apply to some of the roofing tiles Gold Blending Media, Gold Sable, Red Maple and Black Brown in a random pattern. Do not wipe back. Spray with Porcelain Mist Spray and allow to dry.

GRASS: Apply Black Forest to all of the grass area. Add some Sunflower and Tangelo. Blend the colors and wipe back with a soft cloth to desired effect. Spray and allow to dry.

TRIM, VALANCE ABOVE WINDOWS, WINDOW SILLS, EAVES, DOOR CASING and CORNER TRIM: Paint the corner trim, the trim under the eaves, and the lower part of the valance above the windows with Burgundy. Paint the window sills, the face of the eaves, and the upper part of the valance above the windows with Hunter Green. Heavily dry brush the under portion of the eaves with Buttermilk.

STONES: Apply a coat of Ginger Oak to all of the stones. Wipe back with a soft cloth. Spray and allow to dry. Paint some of the stones with Blue Smoke, Walnut, Maple, Toasted Pecan, and Slate Grey in a random pattern. Do not wipe back. Spray and allow to dry.

STEPS: Heavily dry brush the steps with Medium Gray. Then dry brush with White so that the steps look worn.

SIGN: Heavily dry brush the background of the sign with White Acrylic. Using a small detail brush, paint the border, the emblem, and the lettering with Jet Black.

CUPOLA: Apply Copper Penny to the roof of the steeple. Apply Light Patina over the Copper Penny and wipe back. You may need to apply several coats of the Light Patina to achieve the aging process you wish.

Spray entire piece and allow to dry.

Note: If you find a color that is discontinued, ask your Mayco distributor for a suitable replacement.

[Home] 

Contact Us Toll Free - US / Canada:  888-811-6653

Send email to petro@velocity.net with questions or comments about this web site.
Copyright © 1996-2010 Petro Mold Co.
Last modified: August 11, 2010