PT-105 White                                  TL-103 Peach Cameo                                 AC-516 Porcelain Mist Spray
PT-110 Medium Gray                     TL-104 Toasted Pecan                              AC-520 Solvent
PT-117 Jet Black                             TL-106 Red Maple                                      Soft cloth
PT-191 Vanilla Ice                          TL-108 Ginger Oak                                      Various Size Brushes
PT-380 24K Metallic Gold             TL-111 Light Patina                                    Paper Towels
PT-391 Banana Crème                    TL-112 Blue Smoke
PT-395 Ivory Tusk                          TL-113 Hyacinth Blue
                                                           TL-123 Holiday Red
                                                           TL-125 Sunflower
                                                           TL-126 Tangelo
                                                           TL-127 Cool Gray
                                                           TL-128 Warm Gray
                                                           TL-129 Cool Gray
                                                           TL-134 Black Forest
                                                           TL-136 Green Patina

Entire Piece – Apply two coats of White Acrylic. First coat is diluted 1/3 water to 2/3 stain. Scrub into entire piece; apply second coat full strength. Spray with Porcelain Mist Spray. Allow to dry.

Antique – Apply Hyacinth Blue Translucent to entire piece. Allow to dry until tacky, wipe back with a soft cloth to desired effect, allow for shading. If the translucent becomes too dry you can dampen a cloth with some solvent and wipe back further to achieve the effect you wish. Spray and allow to dry.

Bricks – Apply Holiday Red Translucent to all the bricks. Apply some Tangelo for shading. Wipe back to desired effect, spray and allow to dry.

Concrete Corners – Apply Warm Gray Translucent to the corner stones. Spray and allow to dry.  Dry brush with Medium Gray Acrylic, then dry brush again with Ivory Tusk Acrylic.

Steps – Apply Warm Gray Translucent to the steps. Spray and allow to dry.  Dry brush with Medium Gray Acrylic, then dry brush again with White Acrylic.

Grass – Apply Black Forest Translucent to the grass. Add  Sunflower and Tangelo for highlighting. Wipe back with a soft cloth, spray and allow to dry.

Windows/Eaves/Door Frames – Heavily dry brush with Ivory Tusk.

Eyebrow Dormers – Heavily dry brush the window panes with Ivory Tusk. Then paint the trim with Blue Smoke Translucent. Spray and allow to dry.

Portico/Pillars – Apply Warm Gray Translucent, wipe back, spray and allow to dry. When dry, dry brush with Medium Gray Acrylic and heavily dry brush with Ivory Tusk.

Shutters/Doors – Apply Blue Smoke Translucent, wipe back lightly, spray and allow to dry. When dry, dry brush lightly with Vanilla Ice.

Curtains – Dry brush with Banana Crème Acrylic, highlight very lightly with Vanilla Ice.

Sign – Back plate is painted with 24K Metallic Gold. When dry, paint lettering in Jet Black.

Roof – Apply Cool Gray Translucent to entire roof. Wipe back with a soft cloth, spray and allow to dry. When  dry, in a random pattern, paint some of the tiles with Blue Smoke, Peach Cameo, Light Patina and Green Patina. Do not wipe back. Spray and allow to dry.

Hinges/Knobs – Paint with Jet Black.

Spray entire piece and allow to dry.

Please Note: When using translucent stains, you must spray after each application of a translucent stain to avoid smudging and smearing the stains. It is not necessary to spray after each application of an acrylic stain. The final spraying is sufficient for the acrylic stains.

TL-125 Sunflower                     PT-105 White                     RT-501 Polar White             AC-516 Porcelain Mist Spray
TL-126 Tangelo                        PT-118 Flat Black               RT-506 Fuchsia                    AC- 520 Solvent
TL-128 Warm Gray                   PT-191 Vanilla Ice              RT-509 True Blue                 Soft Cloth
TL-134 Black Forest                 PT-234 Med. Mocha         RT-512 Ebony                       Paper Towels
                                                     PT-373 Brick Red                                                               Various Size Brushes
                                                     PT-395 Dusty Gray

On Entire Piece – Apply two coats of White Acrylic to entire piece. First coat is diluted 1/3 water to 2/3 stain. Scrub into whole building, then apply second coat full strength. Spray with Porcelain Mist Spray. Allow to dry.

Antique – Apply Warm Gray Translucent to entire piece. Allow to dry until tacky, wipe back with a soft cloth to desired effect, allow for shading. Spray with Porcelain Mist Spray and allow to dry.

Bricks – Apply Polar White Rich Translucent to the bricks. Wipe back with a soft cloth to desired effect; allow for shading, if Translucents become too dry you can wipe back further with some solvent applied to your cloth.  Spray with Porcelain Mist Spray and allow to dry. Now in a random pattern paint some bricks solidly with Polar White Rich Translucent and Warm Gray Translucent. Do not wipe back, spray and allow to dry.

Shutters/Sign – Apply Ebony Rich Translucent to the shutters and sign. Wipe back with a soft cloth to desired effect. Spray and allow to dry.

Curtains – Apply Polar White Rich Translucent, wipe back, spray and allow to dry.

Roof – Apply Ebony Rich Translucent to the entire roof, wipe back to desired effect. Now apply some True Blue Rich Translucent for shading and (character). Wipe back, spray and allow to dry.

Doors – Apply Fuchsia Rich Translucent, wipe back, spray and allow to dry.

Door Frames – Apply True Blue Rich Translucent to the door frames, wipe back, spray and allow to dry.

Windows and Top of Door – Apply Polar White Rich Translucent to all windows and top of door

Hardware – Apply Flat Black Acrylic to all hardware on the doors.

Eaves – Dry brush under eaves with White Acrylic.

Steps – Dry brush all steps with Dusty Gray Acrylic then highlight with Vanilla Ice Acrylic.

Portico and Pillars – Dry brush with Dusty Gray Acrylic then highlight by dry brushing Vanilla Ice Acrylic to make it look like cement.

Door Frames – Apply Polar White Rich Translucent

Concrete Corner Stones – Apply Warm Gray Translucent, wipe back, spray and allow to dry.

Grass – Apply Black Forest translucent, then apply Tangelo Translucent and Sunflower Translucent for highlighting. Wipe back to desired effect, spray and allow to dry.

Stones – In a random pattern, paint some stones with Vanilla Ice Acrylic, Medium Mocha, Brick Red and Dusty Gray.

Spray entire piece with Porcelain Mist Spray and allow to dry.

Please Note: When using translucent stains, you must spray after each application of a translucent stain to avoid smudging and smearing the stains. It is not necessary to spray after each application of an acrylic stain. The final spraying is sufficient for the acrylic stains.